Sorry - either this article does not exist or you haven't been given permission to view it.
Knowledgebase
(2)3G
(5)ADSL
   

BiPAC 7800DX firmware version 2.32e
BiPAC 7800VDOX firmware version 2.32e
BiPAC 7800X firmware version 2.32e
Latest driver and utility for BiPAC 3011W. Drivers can be download via the links below: Windows all (including 32 bit and 64 bit drivers) - http://www.billion.uk.com/download/3011/3011N_3011W__windows.zip [1] Linux - http://www.billion.uk.com/...
Latest driver and utility for BiPAC 3011N. Drivers can be download via the links below: Windows all (including 32 bit and 64 bit drivers) - http://www.billion.uk.com/download/3011/3011N_3011W__windows.zip [1] Linux - http://www.billion.uk.com/...
7402R2 Annex M Firmware (please check your serial number this firmware is 75Mxxxxxxxx).
You can configure 7800xx to work as a router. This is useful, if you change your service from ADSL to a cable modem service (i.e Virgin Cable Service). If you are using a cable modem, then you can configure the use the Ewan port. There is a WAN port on...
First make sure you have a active internet connection (the internet light should be green on the front of the Billion device) 1. Please change your LAN IP to the IP address your ISP said should be assigned to the router, this is normally the second ...
7800N Configure Onboard PPTP Cleint Dial Out First enable the PPTP first if it isn't enabled already. If it is enabled, then click on the PPTP Client left hand side column. Follow the instruction on the next picture. Configure the PPTP Client dia...
In order to configure your 7800 series router to assign a fixed IP to a networking device, you will need the follows: 1) The MAC address of the device 2) Decide a LAN IP address within the same subnet as your LAN but outside the 7800 series route...
HOW TO FIRMWARE UPGRADE 7800 SERIES ROUTER Please refer to the firmware upgrade guide pdf from this link below: http://www.billion.uk.com/firmware/guides/How to perform firmware upgrade on Billion 7800 series.pdf [1] HOW TO PERFORM FIRMWARE...
First assign an IP address to your computer (i.e 192.168.1.10). Lauch the Internet browser then type 192.168.1.253 in (2073N's default IP address) in the URL box, then press Enter on your keyboard. When prompt enter Username 'Admin' and Password 'admin...
http://www.billion.uk.com/firmware/52xx/5200RC/UK_Billion-5200RC_A_2.12.17.0(UE2.D3)3.12.17.1.zip
You must reset back to factory default settings after the firmware upgrade, this is to ensure all changes within the firmware are implemeneted correctly. Do not restore settings from previous firmware builds
Bipac 7402X v6.24b.dm1
You must reset back to factory default settings after the firmware upgrade, this is to ensure all changes within the firmware are implemeneted correctly. Do not restore settings from previous firmware builds
MAC ENCAPSULATED ROUTING (RFC 1483 MER) Used by Sky Broadband is supported on the following Billion routers. BiPAC 7800N (firmware version 1.06g)
You must reset back to factory default settings after the firmware upgrade, this is to ensure all changes within the firmware are implemeneted correctly. Do not restore settings from previous firmware builds This firmware has a improved wireless ...
Please follow the guide to upgrade your firmware on the 7800 series
Login to 7700N http://192.168.1.254 (default). If you selected 'Obtain IP address automatically' the below screen may not appear, then just jump to step 25.
BILLION 6200NXL 1.04d
Firmware version 1.08l-c for the Bipac 3100SN, this firmware has a improved wireless driver ONLY UPGRADE THIS FIRMWARE WITH A WIRED CONNECTION, YOU CAN NOT UPGRADE THE FIRMWARE VIA A WIRELESS CONNECTION
Latest Firmware for the 7700N Please make sure you reset back to factory default settings, to ensure all changes within the firmware are implemented correctly. Do not restore settings from previous firmware builds.
You can enhance your wireless security by enable the wireless mac filter feature. Please follow the instruction below. 1. First you can add the trusted computer/device's MAC address to the list. 2. A client has added to the filter list. 3. Onc...
1) For non-nat set up you need to add a rules in Packet Filter list. First you create a allow rule. 2) Disable the NAT. 3) Enter one of the public IP address to the router (this is usually specified to you by your ISP). Once you change the rou...
You can set up the wireless security first on the 3100SN. Use an Ethernet cable to establish a connection in between your computer and the 3100SN. You need to assign an IP address to your computer, before you can reach the 3100SN's web GUI (192.168.1.2...
SNR Margin - Upstream OID = 1.3.6.1.2.1.10.97.1.1.2.1.5.2 SNR Margin - Downstream OID = 1.3.6.1.2.1.10.97.1.1.2.1.5.1 Line Speed - Upstream OID = 1.3.6.1.2.1.10.97.1.1.2.1.10.2 Line Speed - Downstream OID = 1.3.6.1.2.1.10.97.1.1.2.1.10.1 L...
BIPAC 7800VDOX 2.32D FIRMWARE NEW FEATURES "> 1. VPN: (VPN models only) 1‐1 Added MTU setting on IPSEC configuration. 1‐2 Added exception group for L2TP and PPTP server. 2. 3G 2‐1 Added support for HUAWEI E392/E1552/E5776 dongle...
BIPAC 7800DX 2.32D FIRMWARE NEW FEATURES "> 1. VPN: (VPN models only) 1‐1 Added MTU setting on IPSEC configuration. 1‐2 Added exception group for L2TP and PPTP server. 2. 3G 2‐1 Added support for HUAWEI E392/E1552/E5776 dongles....
BIPAC 7800DXL 2.32D FIRMWARE NEW FEATURES "> 1. VPN: (VPN models only) 1‐1 Added MTU setting on IPSEC configuration. 1‐2 Added exception group for L2TP and PPTP server. 2. 3G 2‐1 Added support for HUAWEI E392/E1552/E5776 dongles....
Please contact technical support department as issue may be able to resolve with technical staff, if the device require to be return to us, then we shall refer you to the returns process. You can either submit a ticket on the below link, or contact us ...
7800N PPTP Set Up Instructions (Server). It is important that in step 6 the start IP address you assign to the user dail in is outside the DHCP range. Then set up user account. Now, save the settings permenantly.
Firmware version 2.50a.d13 FIXED UNABLE TO CONNECT TO THE WEB GUI  ---- ( XBOXONE  AND  APPLE-TV )  ISSUE” Fixed quick start issue where VLAN ID is reverted back to -1 when configuring for PTM >> IPOE connection
Firmware version 2.50a.d13 Fixed quick start issue where VLAN ID is reverted back to -1 when configuring for PTM >> IPOE connection Improved SNMP, added OID's for WLAN
Attached is a short guide to help you setup your router using PPTP, with your VPN service provider
Bipac 7300GX Firmware 1.08a
We have tested the following Billion routers with Vodafone Sure Signal box version 1 and it connected fine without any changes. 1) BiPAC 7402X series 2) BiPAC 7700N 3) BiPAC 7800 series Based on information from the Internet, the Vodafone ...
BIGUARD S10 3.24X FIRMWARE For firmware changes please see releaser notes. Please download the 3.24X firmware via this link: http://www.billion.uk.com/download/BGS10_3.24x.zip [1] Links: ------ [1] http://www.billion.uk.com/download/BGS10_3.24x....
Windows 32bit and 64bit Utility
Login to http://192.168.1.254 (default). Save settings and the you will prompt to enter the new password set to the router... Click on the 'Apply' to save the new settings permanently (see below).
BiGuard S20 3.26 firmware You can download the firmware from this link: http://www.billion.uk.com/firmware/biguard/BGS20/BGS20_3.26.zip [1] Links: ------ [1] http://www.billion.uk.com/firmware/biguard/BGS20/BGS20_3.26.zip
By default the router will obtain the DNS details, but you can set your own DNS server. Below are the most commonly use DNS server: Open DNS Servers Primary: 208.67.222.222 Secondary: 208.67.220.220 Google DNS Servers Primary:8.8.8.8 Sec...
Before you attempt to set up the password protection on your Homeplugs. Plug all the Homeplug deviecs to the wall mount electrical socket, preferably in the same room. Once plugged in power up the devices(if you have two 2073N then you need to change t...
Bipac 3011N Mac USB Driver
Site to site VPN using PPTP. Below is OFFICE A's PPTP configuration. Wan: 71.72.73.74 Lan: 192.168.1.x Once you added it will look somethiing like below picture, and you to tick the box to make it active ready for a dial in connection. S...
Bipac 7402NX v6.24bm1 Firmware
7800GZ Frimware v1.06e
WDS is quite easy to set up. 1). Same radio channel 2). Same wireless security (if wireless security is in use). 3). Enable WDS on both devices 4). Enter the MAC address of the opposit device. First we configure the 7800N. And then sa...
9TH MAY, 2012 8200N FIRMWARE VERSION 1.06A.DT6 This firmware version fixed a MAC filtering and wireless domain issue.
You must reset back to factory default settings after the firmware upgrade, this is to ensure all changes within the firmware are implemeneted correctly. Do not restore settings from previous firmware builds This firmware supports SKY MER authent...
Utility for Windows
To change the router's IP address. Login to http://192.168.1.254 Login as 'Administrator'. Once login then change the router's IP address. After click on the 'Apply button, then you will see the below message, please wait for 10 seconds. Wh...
7700N portforwarding guide, please click to download.
Once upgraded, please reset back to factory default settings to ensure all changes within the firmware are implemented correctly.
You must reset back to factory default settings after the firmware upgrade, this is to ensure all changes within the firmware are implemeneted correctly. Do not restore settings from previous firmware builds This firmware supports SKY MER authent...
You must reset back to factory default settings after the firmware upgrade, this is to ensure all changes within the firmware are implemeneted correctly. Do not restore settings from previous firmware builds This firmware supports SKY MER authent...
7800DXL user manual attached.
Firmware 6.24c Please upgrade your device and make sure you reset back to factory default settings to ensure all changes within the firmware are implemented correctly. Do not restore settings from previous firmware builds.
Fixes QOS issue when using PPPOA
Zip file contains the contents from the CD that came with the device (Utility, Manual etc)
Fixes QOS issue when using PPPOA
Firmware 6.24c for the 7402x Release Notes below ==== 6.24c Release ====     Based on the version 6.24b.dm6 and add following fixes/changes/enhances:     [Enhance] 1, Add ZTE MF652 supported. [Fix] 1, Resolve RFC2833 is...
Attached is Windows 8/Windows 8.1 driver for the Bipac 3010ND
Attached is guide to help manually setup the 8800/8900 with a VDSL (PTM) PPPoE connection from default settings, also how to change the 'admin' password for the device and how to setup port forwarding rules
Newest articles