8800AXL R2 Reset to Default

Discussions for BiPAC 8800 series: 8800NL
billion_fan
Posts: 5208
Joined: Tue Jul 19, 2011 4:30 pm

Re: 8800AXL R2 Reset to Default

Post by billion_fan » Fri Apr 03, 2020 5:55 pm

shamusdb wrote:
Fri Apr 03, 2020 5:37 pm
No worries mate. Thanks for the help

Stay safe

Shamusdb
Hope you and your family stay safe also

shamusdb
Posts: 21
Joined: Wed Jan 16, 2019 7:44 am

Re: 8800AXL R2 Reset to Default

Post by shamusdb » Fri Apr 03, 2020 6:45 pm

Yeah tried putty. Not too familiar with it tbh so just enntering the ip address nd leaving the default ports as they are but no connection.

I can't even ping the router ip. Must be the firewall doing its thing

Shamus

billion_fan
Posts: 5208
Joined: Tue Jul 19, 2011 4:30 pm

Re: 8800AXL R2 Reset to Default

Post by billion_fan » Fri Apr 03, 2020 6:52 pm

shamusdb wrote:
Fri Apr 03, 2020 6:45 pm
Yeah tried putty. Not too familiar with it tbh so just enntering the ip address nd leaving the default ports as they are but no connection.

I can't even ping the router ip. Must be the firewall doing its thing

Shamus
Yep sounds like the LAN side firewall is doing its job correctly (default ports 22 SSH/ Telnet 23 are un-adjustable internally)

shamusdb
Posts: 21
Joined: Wed Jan 16, 2019 7:44 am

Re: 8800AXL R2 Reset to Default

Post by shamusdb » Sat Apr 04, 2020 6:16 pm

Well I've had it apart today and resoldered a couple of suspect joints but still no joy. It does still work but the fact I can't get into it is really going to bother me so if its ok to post here, do you have any recommendations for a unit to replace the 8800AXL R2 or maybe suggest a newer unit out there if there is one. I know It was my own fault that i closed the door by ticking the firewall box but because i can't factory reset the box it would make me stay clear of this unit again tbh.

Cheers
Shaun

billion_fan
Posts: 5208
Joined: Tue Jul 19, 2011 4:30 pm

Re: 8800AXL R2 Reset to Default

Post by billion_fan » Mon Apr 06, 2020 8:58 am

shamusdb wrote:
Sat Apr 04, 2020 6:16 pm
Well I've had it apart today and resoldered a couple of suspect joints but still no joy. It does still work but the fact I can't get into it is really going to bother me so if its ok to post here, do you have any recommendations for a unit to replace the 8800AXL R2 or maybe suggest a newer unit out there if there is one. I know It was my own fault that i closed the door by ticking the firewall box but because i can't factory reset the box it would make me stay clear of this unit again tbh.

Cheers
Shaun
Right now there's a stock issue, I would look at the 8900 series (once we get stock again)

Post Reply