Page 1 of 1

FW 2.52.d15 8800AXL R2 US output power

Posted: Wed Aug 28, 2019 10:55 am
by youngsyp
Hi,

Has anyone else noticed the output power from their 8800AXL R2, on the upstream, is reporting as a negative number with the latest FW version?

Please see attachment.

Cheers,

Paul

Re: FW 2.52.d15 8800AXL R2 US output power

Posted: Wed Aug 28, 2019 11:21 am
by billion_fan
youngsyp wrote:
Wed Aug 28, 2019 10:55 am
Hi,

Has anyone else noticed the output power from their 8800AXL R2, on the upstream, is reporting as a negative number with the latest FW version?

Please see attachment.

Cheers,

Paul
Just tested my test unit, output power looks fine (see attached screen shot)

(I'll also double check with our engineers to confirm, as the DSL code is the same as previous versions)

Re: FW 2.52.d15 8800AXL R2 US output power

Posted: Wed Aug 28, 2019 11:28 am
by youngsyp
Thanks for that. Would the fact that you're not replicating my set up (I.e. xDSL Mode), affect what you're seeing, in comparison?

Paul

Re: FW 2.52.d15 8800AXL R2 US output power

Posted: Wed Aug 28, 2019 12:23 pm
by billion_fan
youngsyp wrote:
Wed Aug 28, 2019 11:28 am
Thanks for that. Would the fact that you're not replicating my set up (I.e. xDSL Mode), affect what you're seeing, in comparison?

Paul
Not that I'm aware of, but I will get my engineers to confirm

Our engineers have stated the output power looks fine from there tests, they have stated to try a factory reset (but I am not sure that will help)

Re: FW 2.52.d15 8800AXL R2 US output power

Posted: Thu Aug 29, 2019 5:35 pm
by kmr1962
youngsyp wrote:
Wed Aug 28, 2019 11:28 am
Thanks for that. Would the fact that you're not replicating my set up (I.e. xDSL Mode), affect what you're seeing, in comparison?

Paul
Just for info, Mine shows OK on VDSL2 on firmware 2.52.d15
Capture-2.JPG

Edit :
One thing just occurred to me
I have a recollection that ECI FTTC cabinets have a tendency to report "Strange" power settings
The cabinet I'm connected to is a Huawei cabinet.

Kevin

Re: FW 2.52.d15 8800AXL R2 US output power

Posted: Tue Sep 03, 2019 9:27 pm
by Grimers
Yes, Kevin is right. I wouldn't be too concerned about that, it is possible for power output to be a negative figure on ECI cabinets.