8800NL - Port forwarding stops working after a while

Discussions for BiPAC 8800 series: 8800NL
louialive
Posts: 2
Joined: Wed Jan 02, 2019 1:01 pm

Re: 8800NL - Port forwarding stops working after a while

Post by louialive » Wed Jan 02, 2019 1:12 pm

Has this issue been resolved as 2.23e still has problem

JackPGreen
Posts: 9
Joined: Tue Jan 10, 2017 9:55 pm

Re: 8800NL - Port forwarding stops working after a while

Post by JackPGreen » Wed Jan 02, 2019 1:26 pm

FYI using the test firmware I was sent and this issue has not re-occured.

billion_fan
Posts: 5202
Joined: Tue Jul 19, 2011 4:30 pm

Re: 8800NL - Port forwarding stops working after a while

Post by billion_fan » Wed Jan 02, 2019 2:05 pm

louialive wrote:
Wed Jan 02, 2019 1:12 pm
Has this issue been resolved as 2.23e still has problem
Issue was resolved on 2.32e.d14

Firmware can be found on the following link
viewtopic.php?f=19&t=13838

JackPGreen
Posts: 9
Joined: Tue Jan 10, 2017 9:55 pm

Re: 8800NL - Port forwarding stops working after a while

Post by JackPGreen » Thu Jan 03, 2019 12:47 am

billion_fan wrote:
Wed Jan 02, 2019 2:05 pm
louialive wrote:
Wed Jan 02, 2019 1:12 pm
Has this issue been resolved as 2.23e still has problem
Issue was resolved on 2.32e.d14

Firmware can be found on the following link
viewtopic.php?f=19&t=13838
Are there any other improvements in this firmware? Is it scheduled for release soon?

louialive
Posts: 2
Joined: Wed Jan 02, 2019 1:01 pm

Re: 8800NL - Port forwarding stops working after a while

Post by louialive » Mon Jan 14, 2019 1:19 pm

billion_fan wrote:
Wed Jan 02, 2019 2:05 pm
louialive wrote:
Wed Jan 02, 2019 1:12 pm
Has this issue been resolved as 2.23e still has problem
Issue was resolved on 2.32e.d14

Firmware can be found on the following link
viewtopic.php?f=19&t=13838
Does this require factory default after installing

billion_fan
Posts: 5202
Joined: Tue Jul 19, 2011 4:30 pm

Re: 8800NL - Port forwarding stops working after a while

Post by billion_fan » Tue Jan 15, 2019 9:37 am

louialive wrote:
Mon Jan 14, 2019 1:19 pm
billion_fan wrote:
Wed Jan 02, 2019 2:05 pm
louialive wrote:
Wed Jan 02, 2019 1:12 pm
Has this issue been resolved as 2.23e still has problem
Issue was resolved on 2.32e.d14

Firmware can be found on the following link
viewtopic.php?f=19&t=13838
Does this require factory default after installing
I don't think you have to reset back to factory default settings

Post Reply