Latest Firmware...?

Post Reply
stevebez
Posts: 36
Joined: Thu Jun 07, 2012 10:02 am

Latest Firmware...?

Post by stevebez » Thu Oct 20, 2016 10:17 am

Hi guys 7800N with Sky Fibre and firmware 1.06g.dc1- is this the latest firmware for FTTC?

If not what are the changes to the latest firmware and where can I get it ?

Lastly, is it possible to set MTU settings in the 7800 to jumbo (9000) ?

billion_fan
Posts: 5201
Joined: Tue Jul 19, 2011 4:30 pm

Re: Latest Firmware...?

Post by billion_fan » Thu Oct 20, 2016 1:18 pm

stevebez wrote:Hi guys 7800N with Sky Fibre and firmware 1.06g.dc1- is this the latest firmware for FTTC?

If not what are the changes to the latest firmware and where can I get it ?

Lastly, is it possible to set MTU settings in the 7800 to jumbo (9000) ?
Latest firmware that supports Sky Fibre can be found here

http://www.billion.uk.com/esupport/inde ... 0n-106hdt2

The switch part of the 7800N supports jumbo frames 9KB MTU, see my test results, two PC's with jumbo frames enabled, ping test
You do not have the required permissions to view the files attached to this post.

stevebez
Posts: 36
Joined: Thu Jun 07, 2012 10:02 am

Re: Latest Firmware...?

Post by stevebez » Thu Oct 20, 2016 1:42 pm

Many thanks ... installed although could not spot any obvious changes ... ?

Also do you leave the WAN MTU at 1500 for best practice?

Post Reply