Bipac 7800N 1.06g Firmware

This area contains firmware that are currently under testings.
gearcam
Posts: 11
Joined: Sun Feb 22, 2015 6:50 pm

Re: Bipac 7800N 1.06g Firmware

Post by gearcam » Fri Feb 27, 2015 9:34 pm

hi thanks
I used wireshark have the username and password.

should the username be xxxxxx@skydsl or xxxxxx@skydsl.com ???

also do I have to put mac spoofing in ?

current wan parameters
Port ADSL
protocol MPoA.....
Desc MER_0_0_40
VPI/VCI 0/40
Encap MUX
Nat Enabled
Mac Spoofing "Blank"
Client ID from "wireshark"
IP 0.0.0.0
Netmask is blank
Obtain DNS Automatic ticked
MTU 1500
IPv6 in not enabled


But it will not connect ?

Any ideas?

Steve

billion_fan
Posts: 5217
Joined: Tue Jul 19, 2011 4:30 pm

Re: Bipac 7800N 1.06g Firmware

Post by billion_fan » Mon Mar 02, 2015 11:07 am

gearcam wrote:hi thanks
I used wireshark have the username and password.

should the username be xxxxxx@skydsl or xxxxxx@skydsl.com ???

also do I have to put mac spoofing in ?

current wan parameters
Port ADSL
protocol MPoA.....
Desc MER_0_0_40
VPI/VCI 0/40
Encap MUX
Nat Enabled
Mac Spoofing "Blank"
Client ID from "wireshark"
IP 0.0.0.0
Netmask is blank
Obtain DNS Automatic ticked
MTU 1500
IPv6 in not enabled


But it will not connect ?

Any ideas?

Steve
If you are using ADSL you need to change the protocol to PPPOA, and enter your sky username and password in the sections provided

No need to clone the MAC, and the username should end with @skydsl

gearcam
Posts: 11
Joined: Sun Feb 22, 2015 6:50 pm

Re: Bipac 7800N 1.06g Firmware

Post by gearcam » Mon Mar 02, 2015 1:44 pm

HI Thanks for the info

I have tried as you suggest with connection mode set to ADSL
protocol to PPPOA will not connect I left it for 30 Mins with username and password I did not change anything else.

For Sky I have read it uses MEP to connect and that's how my Sky modem connects.
But I can not get this to connect however I set it up except by using EWAN and the sky router as a modem with its Wi-Fi turned off

I really want to get to one box and not use the sky router at all

I am trying on 1.06h firmware but its the same.

Steve

billion_fan
Posts: 5217
Joined: Tue Jul 19, 2011 4:30 pm

Re: Bipac 7800N 1.06g Firmware

Post by billion_fan » Mon Mar 02, 2015 2:40 pm

gearcam wrote:HI Thanks for the info

I have tried as you suggest with connection mode set to ADSL
protocol to PPPOA will not connect I left it for 30 Mins with username and password I did not change anything else.

For Sky I have read it uses MEP to connect and that's how my Sky modem connects.
But I can not get this to connect however I set it up except by using EWAN and the sky router as a modem with its Wi-Fi turned off

I really want to get to one box and not use the sky router at all

I am trying on 1.06h firmware but its the same.

Steve
Once setup with PPPOA/ADSL, check the status page of the router to see if it states authentication failed.

With SKY ADSL customers the protocol to use is PPPOA. (with your username and password entered)

gearcam
Posts: 11
Joined: Sun Feb 22, 2015 6:50 pm

Re: Bipac 7800N 1.06g Firmware

Post by gearcam » Mon Mar 02, 2015 8:17 pm

hi I tried this but no connection last bit of log is

Jan 01 00:03:30 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:03:31 daemon DHCP SERVER: DHCP request from 48:5a:3f:67:94:6f
Jan 01 00:03:31 daemon DHCP SERVER: DHCP ack to 48:5a:3f:67:94:6f
Jan 01 00:03:33 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:03:36 user kernel: Line 0: ADSL link down
Jan 01 00:03:39 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:45 user kernel: Line 0: ADSL link down
Jan 01 00:03:48 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:54 user kernel: Line 0: ADSL link down
Jan 01 00:03:58 user kernel: Line 0: xDSL G.994 training
Jan 01 00:04:03 user kernel: Line 0: ADSL link down
Jan 01 00:04:07 user kernel: Line 0: xDSL G.994 training
Jan 01 00:04:12 user kernel: Line 0: ADSL link down
Jan 01 00:04:16 user kernel: Line 0: xDSL G.994 training
Jan 01 00:04:22 user kernel: Line 0: ADSL link down
Jan 01 00:04:25 user kernel: Line 0: xDSL G.994 training

it just keeps going around !!

Steve

How will PPOA work if sky router is on MEP ?

This is from my sky router while on line


Broadband Port

MAC Address7c:4c:a5:fb:a5:a2
IP Address151.224.169.110
Network TypeMER
IP Subnet Mask255.255.252.0
Gateway IP Address151.224.168.1
Domain Name Server90.207.238.97, 90.207.238.99

Steve

billion_fan
Posts: 5217
Joined: Tue Jul 19, 2011 4:30 pm

Re: Bipac 7800N 1.06g Firmware

Post by billion_fan » Tue Mar 03, 2015 10:22 am

gearcam wrote:hi I tried this but no connection last bit of log is

Jan 01 00:03:30 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:03:31 daemon DHCP SERVER: DHCP request from 48:5a:3f:67:94:6f
Jan 01 00:03:31 daemon DHCP SERVER: DHCP ack to 48:5a:3f:67:94:6f
Jan 01 00:03:33 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:03:36 user kernel: Line 0: ADSL link down
Jan 01 00:03:39 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:45 user kernel: Line 0: ADSL link down
Jan 01 00:03:48 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:54 user kernel: Line 0: ADSL link down
Jan 01 00:03:58 user kernel: Line 0: xDSL G.994 training
Jan 01 00:04:03 user kernel: Line 0: ADSL link down
Jan 01 00:04:07 user kernel: Line 0: xDSL G.994 training
Jan 01 00:04:12 user kernel: Line 0: ADSL link down
Jan 01 00:04:16 user kernel: Line 0: xDSL G.994 training
Jan 01 00:04:22 user kernel: Line 0: ADSL link down
Jan 01 00:04:25 user kernel: Line 0: xDSL G.994 training

it just keeps going around !!

Steve

How will PPOA work if sky router is on MEP ?

This is from my sky router while on line


Broadband Port

MAC Address7c:4c:a5:fb:a5:a2
IP Address151.224.169.110
Network TypeMER
IP Subnet Mask255.255.252.0
Gateway IP Address151.224.168.1
Domain Name Server90.207.238.97, 90.207.238.99

Steve
It looks like the router is loosing sync with the ADSL line, as far as I know, most customers can still use PPPOA even though there Sky router is using MER, from reports with other sky users if MER fails on the 7800, they use PPPOA and it works fine.

Regarding the ADSL losing sync I would suggest visiting this page http://192.168.1.254/snr.html and change the SNR value to 150, once you click on 'Apply' the router will drop its DSL sync and resync once resynced lets see if the DSL connection stays up, (meaning the DSL light on the front of the router stays on solid)

gearcam
Posts: 11
Joined: Sun Feb 22, 2015 6:50 pm

Re: Bipac 7800N 1.06g Firmware

Post by gearcam » Tue Mar 03, 2015 1:46 pm

Hi I have done as you suggest but no difference still flashing light after 20 mins
3 tests as you suggest, then MPOA again and then as you suggest see logs below

PPPOA SNR value to 150
Jan 01 00:06:26 user kernel: Line 0: xDSL G.994 training
Jan 01 00:06:30 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:06:32 user kernel: Line 0: ADSL link down
Jan 01 00:06:33 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:06:35 user kernel: Line 0: xDSL G.994 training
Jan 01 00:06:41 user kernel: Line 0: ADSL link down
Jan 01 00:06:44 user kernel: Line 0: xDSL G.994 training
Jan 01 00:06:50 user kernel: Line 0: ADSL link down
Jan 01 00:06:53 user kernel: Line 0: xDSL G.994 training
Jan 01 00:06:59 user kernel: Line 0: ADSL link down
Jan 01 00:07:02 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:08 user kernel: Line 0: ADSL link down
Jan 01 00:07:11 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:17 user kernel: Line 0: ADSL link down
Jan 01 00:07:20 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:26 user kernel: Line 0: ADSL link down
Jan 01 00:07:29 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:35 user kernel: Line 0: ADSL link down
Jan 01 00:07:38 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:44 user kernel: Line 0: ADSL link down
Jan 01 00:07:48 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:53 user kernel: Line 0: ADSL link down
Jan 01 00:07:57 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:03 user kernel: Line 0: ADSL link down
Jan 01 00:08:06 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:12 user kernel: Line 0: ADSL link down
Jan 01 00:08:15 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:21 user kernel: Line 0: ADSL link down
Jan 01 00:08:24 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:30 user kernel: Line 0: ADSL link down
Jan 01 00:08:32 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:08:33 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:35 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:08:39 user kernel: Line 0: ADSL link down
Jan 01 00:08:42 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:48 user kernel: Line 0: ADSL link down
Jan 01 00:08:48 user syslog: web: logout (timeout)
Jan 01 00:08:51 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:57 user kernel: Line 0: ADSL link down
Jan 01 00:08:58 user syslog: web: ::ffff:192.168.1.6 login
Jan 01 00:09:00 user kernel: Line 0: xDSL G.994 training

MPoA
Jan 01 00:02:24 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:02:27 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:02:29 user kernel: Line 0: ADSL link down
Jan 01 00:02:32 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:37 user syslog: ethctl eth0 vport query 2>/var/vcfgerr
Jan 01 00:02:37 user syslog: rm /var/vcfgerr
Jan 01 00:02:37 user syslog: ethctl eth1 vport query 2>/var/vcfgerr
Jan 01 00:02:37 user syslog: rm /var/vcfgerr
Jan 01 00:02:38 user kernel: Line 0: ADSL link down
Jan 01 00:02:41 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:47 user kernel: Line 0: ADSL link down
Jan 01 00:02:50 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:56 user kernel: Line 0: ADSL link down
Jan 01 00:02:59 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:05 user kernel: Line 0: ADSL link down
Jan 01 00:03:08 user kernel: Line 0: xDSL G.994 training

PPPOA SNR value to 150 2nd try
Jan 01 00:02:22 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:25 daemon DHCP SERVER: DHCP release from 48:5a:3f:67:94:6f
Jan 01 00:02:28 user kernel: Line 0: ADSL link down
Jan 01 00:02:31 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:37 user kernel: Line 0: ADSL link down
Jan 01 00:02:40 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:46 user kernel: Line 0: ADSL link down
Jan 01 00:02:49 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:55 user kernel: Line 0: ADSL link down
Jan 01 00:02:58 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:04 user kernel: Line 0: ADSL link down
Jan 01 00:03:08 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:13 user kernel: Line 0: ADSL link down
Jan 01 00:03:17 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:23 user kernel: Line 0: ADSL link down
Jan 01 00:03:26 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:32 user kernel: Line 0: ADSL link down
Jan 01 00:03:35 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:41 user kernel: Line 0: ADSL link down
Jan 01 00:03:44 user kernel: Line 0: xDSL G.994 training

billion_fan
Posts: 5217
Joined: Tue Jul 19, 2011 4:30 pm

Re: Bipac 7800N 1.06g Firmware

Post by billion_fan » Tue Mar 03, 2015 1:59 pm

gearcam wrote:Hi I have done as you suggest but no difference still flashing light after 20 mins
3 tests as you suggest, then MPOA again and then as you suggest see logs below

PPPOA SNR value to 150
Jan 01 00:06:26 user kernel: Line 0: xDSL G.994 training
Jan 01 00:06:30 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:06:32 user kernel: Line 0: ADSL link down
Jan 01 00:06:33 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:06:35 user kernel: Line 0: xDSL G.994 training
Jan 01 00:06:41 user kernel: Line 0: ADSL link down
Jan 01 00:06:44 user kernel: Line 0: xDSL G.994 training
Jan 01 00:06:50 user kernel: Line 0: ADSL link down
Jan 01 00:06:53 user kernel: Line 0: xDSL G.994 training
Jan 01 00:06:59 user kernel: Line 0: ADSL link down
Jan 01 00:07:02 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:08 user kernel: Line 0: ADSL link down
Jan 01 00:07:11 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:17 user kernel: Line 0: ADSL link down
Jan 01 00:07:20 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:26 user kernel: Line 0: ADSL link down
Jan 01 00:07:29 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:35 user kernel: Line 0: ADSL link down
Jan 01 00:07:38 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:44 user kernel: Line 0: ADSL link down
Jan 01 00:07:48 user kernel: Line 0: xDSL G.994 training
Jan 01 00:07:53 user kernel: Line 0: ADSL link down
Jan 01 00:07:57 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:03 user kernel: Line 0: ADSL link down
Jan 01 00:08:06 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:12 user kernel: Line 0: ADSL link down
Jan 01 00:08:15 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:21 user kernel: Line 0: ADSL link down
Jan 01 00:08:24 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:30 user kernel: Line 0: ADSL link down
Jan 01 00:08:32 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:08:33 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:35 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:08:39 user kernel: Line 0: ADSL link down
Jan 01 00:08:42 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:48 user kernel: Line 0: ADSL link down
Jan 01 00:08:48 user syslog: web: logout (timeout)
Jan 01 00:08:51 user kernel: Line 0: xDSL G.994 training
Jan 01 00:08:57 user kernel: Line 0: ADSL link down
Jan 01 00:08:58 user syslog: web: ::ffff:192.168.1.6 login
Jan 01 00:09:00 user kernel: Line 0: xDSL G.994 training

MPoA
Jan 01 00:02:24 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:02:27 daemon DHCP SERVER: DHCPINFORM from 192.168.1.6
Jan 01 00:02:29 user kernel: Line 0: ADSL link down
Jan 01 00:02:32 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:37 user syslog: ethctl eth0 vport query 2>/var/vcfgerr
Jan 01 00:02:37 user syslog: rm /var/vcfgerr
Jan 01 00:02:37 user syslog: ethctl eth1 vport query 2>/var/vcfgerr
Jan 01 00:02:37 user syslog: rm /var/vcfgerr
Jan 01 00:02:38 user kernel: Line 0: ADSL link down
Jan 01 00:02:41 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:47 user kernel: Line 0: ADSL link down
Jan 01 00:02:50 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:56 user kernel: Line 0: ADSL link down
Jan 01 00:02:59 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:05 user kernel: Line 0: ADSL link down
Jan 01 00:03:08 user kernel: Line 0: xDSL G.994 training

PPPOA SNR value to 150 2nd try
Jan 01 00:02:22 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:25 daemon DHCP SERVER: DHCP release from 48:5a:3f:67:94:6f
Jan 01 00:02:28 user kernel: Line 0: ADSL link down
Jan 01 00:02:31 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:37 user kernel: Line 0: ADSL link down
Jan 01 00:02:40 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:46 user kernel: Line 0: ADSL link down
Jan 01 00:02:49 user kernel: Line 0: xDSL G.994 training
Jan 01 00:02:55 user kernel: Line 0: ADSL link down
Jan 01 00:02:58 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:04 user kernel: Line 0: ADSL link down
Jan 01 00:03:08 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:13 user kernel: Line 0: ADSL link down
Jan 01 00:03:17 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:23 user kernel: Line 0: ADSL link down
Jan 01 00:03:26 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:32 user kernel: Line 0: ADSL link down
Jan 01 00:03:35 user kernel: Line 0: xDSL G.994 training
Jan 01 00:03:41 user kernel: Line 0: ADSL link down
Jan 01 00:03:44 user kernel: Line 0: xDSL G.994 training
It seems the 7800 is unable to sync with your line, from the ADSL link down messages, so PPPOA/MER authentication method is not important as the DSL is not syncing. (if you can get the DSL light to stay on, then we can move on to PPPOA)

Have you tested your DSL line with Sky's equipment, does it sync up?? (skys equipment should have a light that indicates the router is synced)

gearcam
Posts: 11
Joined: Sun Feb 22, 2015 6:50 pm

Re: Bipac 7800N 1.06g Firmware

Post by gearcam » Tue Mar 03, 2015 2:37 pm

Hi yes the sky router conects fine all lights on.

I have to use the sky router as a modem then 7800N to run the network

Steve

gearcam
Posts: 11
Joined: Sun Feb 22, 2015 6:50 pm

Re: Bipac 7800N 1.06g Firmware

Post by gearcam » Tue Mar 03, 2015 8:54 pm

Hi this is from the sky router

Report status 1

DSL Line is OK

You are connected using MER, your ip address is:151.224.169.110




Connection Status

Connection Time07:08:52

Connecting to ServerConnected

NegotiationMER

AuthenticationAUTO

IP Address151.224.169.110

Post Reply