6300NX 4g and usb issues
Posted: Wed Sep 16, 2015 10:26 pm
I just bought a 6300NX and I’m having a problem with it recognising android phones and a USB dongle. I have had great use out of my 7800DXL, but wanted a vpn option so I thought it would be ideal as I didn’t need all the options of the 7800DX.
It was probably foolish, but I presumed any device(s) that worked with the 7800DXL would work with the 6300NX. I have tried various router setting with several android LTE phones and even a Huawei E3256 dongle with no luck. It will not establish a link and the system log mentions it doesn’t support the USB device. The strange thing is that there isn’t even a 4g/lte option that the 7800 has. It only has umts, gsm, gprs or automatic. I have also upgraded to the latest (only) firmware.
My other option would be to have the 6300 as an access point running off the 7800, but I cannot get the vpn to work. I can get an Internet connection working in various EWAN modes, but the pptp vpn is not kicking in. I suspect it’s because it will be ignored in bridge mode and I have to enable NAT to get an Internet connection in dynamic or static IP mode.
I was thinking about just going for a 7800DX, but I now don’t know if I will get the vpn to work (Private Internet Access account) and/or if my android phone will tether with it.
There seems to be very little info on the 6300NX and no dongle/device compatibility list. I have had no response from tech support (ticket) so any help would be greatly appreciated.
System log:
[3gDeamon1@1] In 3g_ext main(), Got External 3G Wan Port at port 1
[3gDeamon1@1] Got External 3G Wan Port
[3gDeamon1@1] going to change mode
[3gDeamon1@1] glb_vendor = , glb_product =
[3gDeamon1@1] _3g_ext_vendor = 0x18d1, _3g_ext_product = 0x4ee3
[3gDeamon1@1] convert(), vendor = 18d1, product = 4ee3
[3gDeamon1@1] plug into storage-like device 18d1:4ee3
[3gDeamon1@1] Not support this usb device in our 3G deamon for busb_modeswitch,port(1)(vid:0x18d1,pid:0x4ee3)
[3gDeamon1@1] Not support this usb device in our 3G deamon for usb_modeswitch,port(1)(vid:0x18d1,pid:0x4ee3)
[3gDeamon1@1] change mode end
[3gDeamon1@1] change mode end
[3gDeamon1@1] check_mode() entered, port(1)
[3gDeamon1@1] In 3g_ext main(), port(1), vendor=0x18d1, product=0x4ee3
[3gDeamon1@1] _3g_ext_init()
[3gDeamon1@1] In 3g_ext main(), rmmod usbserial then insmod, port(1)
It was probably foolish, but I presumed any device(s) that worked with the 7800DXL would work with the 6300NX. I have tried various router setting with several android LTE phones and even a Huawei E3256 dongle with no luck. It will not establish a link and the system log mentions it doesn’t support the USB device. The strange thing is that there isn’t even a 4g/lte option that the 7800 has. It only has umts, gsm, gprs or automatic. I have also upgraded to the latest (only) firmware.
My other option would be to have the 6300 as an access point running off the 7800, but I cannot get the vpn to work. I can get an Internet connection working in various EWAN modes, but the pptp vpn is not kicking in. I suspect it’s because it will be ignored in bridge mode and I have to enable NAT to get an Internet connection in dynamic or static IP mode.
I was thinking about just going for a 7800DX, but I now don’t know if I will get the vpn to work (Private Internet Access account) and/or if my android phone will tether with it.
There seems to be very little info on the 6300NX and no dongle/device compatibility list. I have had no response from tech support (ticket) so any help would be greatly appreciated.
System log:
[3gDeamon1@1] In 3g_ext main(), Got External 3G Wan Port at port 1
[3gDeamon1@1] Got External 3G Wan Port
[3gDeamon1@1] going to change mode
[3gDeamon1@1] glb_vendor = , glb_product =
[3gDeamon1@1] _3g_ext_vendor = 0x18d1, _3g_ext_product = 0x4ee3
[3gDeamon1@1] convert(), vendor = 18d1, product = 4ee3
[3gDeamon1@1] plug into storage-like device 18d1:4ee3
[3gDeamon1@1] Not support this usb device in our 3G deamon for busb_modeswitch,port(1)(vid:0x18d1,pid:0x4ee3)
[3gDeamon1@1] Not support this usb device in our 3G deamon for usb_modeswitch,port(1)(vid:0x18d1,pid:0x4ee3)
[3gDeamon1@1] change mode end
[3gDeamon1@1] change mode end
[3gDeamon1@1] check_mode() entered, port(1)
[3gDeamon1@1] In 3g_ext main(), port(1), vendor=0x18d1, product=0x4ee3
[3gDeamon1@1] _3g_ext_init()
[3gDeamon1@1] In 3g_ext main(), rmmod usbserial then insmod, port(1)