Page 1 of 1
8800AXL & HG612 Setup
Posted: Tue May 12, 2020 3:31 pm
by Mike306
I would like to use my 8800AXL in router mode and use with the Openreach HG612 modem.
I did try connecting the HG612 to the WAN port of the 8800AXL but can not getting it working so not sure how the 8800AXL should be set up
Please can you advise how best to set this up?
Re: 8800AXL & HG612 Setup
Posted: Tue May 12, 2020 3:42 pm
by billion_fan
Mike306 wrote: ↑Tue May 12, 2020 3:31 pm
I would like to use my 8800AXL in router mode and use with the Openreach HG612 modem.
I did try connecting the HG612 to the WAN port of the 8800AXL but can not getting it working so not sure how the 8800AXL should be set up
Please can you advise how best to set this up?
What you need to do is add a new Ethernet >> WAN connection, to the Billion. The following setup is for using a external modem with normal ISP's that support a PPPoE connection eg BT, PlusNet, Zen, IDnet etc, the below setup will not work with Sky or Talktalk Home. (you haven't specified your ISP so I have only listed the setup for the most common ISP's)
1. Login to the router
2. Click on 'Configuration >> WAN >> WAN Service
3. Click on 'Add'
4. Change the 'WAN Port' to 'Ethernet'
5. Change the 'Type' to PPPoE and enter your broadband username and password in the sections provided
6. Click on 'Next'
7. Under 'Available Routed WAN Interfaces' you will see the new Ethernet PPPoE interface, click on it to select it, and click on the arrow pointing left, so the interface should be listed under 'Selected Default Gateway Interfaces'
8. Do the same for the DNS severs below (select the PPPoE interface listed under 'Available WAN Interfaces' and click on the arrow pointing left so it should be listed under 'Selected DNS Server Interfaces'
9. Click on 'Next'
10. Now plug a Ethernet connection from your HG612 to the EWAN port (Red port 5) on the Billion,
Re: 8800AXL & HG612 Setup
Posted: Tue May 12, 2020 4:02 pm
by Mike306
Thanks for the quick reply, yes I should have said who my ISP is!
It's TalkTalk Business, is it possible to set it up to work with them?
Re: 8800AXL & HG612 Setup
Posted: Tue May 12, 2020 4:24 pm
by billion_fan
Mike306 wrote: ↑Tue May 12, 2020 4:02 pm
Thanks for the quick reply, yes I should have said who my ISP is!
It's TalkTalk Business, is it possible to set it up to work with them?
If its talktalk business then you can follow the steps posted (you will need your talktalk business broadband username and password to proceed)
Re: 8800AXL & HG612 Setup
Posted: Tue May 12, 2020 5:17 pm
by Mike306
billion_fan wrote: ↑Tue May 12, 2020 4:24 pm
If its talktalk business then you can follow the steps posted (you will need your talktalk business broadband username and password to proceed)
Great, many thanks for your help.