Page 1 of 1

Block Internet Traffic for user - wifi & ethernet.

Posted: Mon Apr 06, 2020 10:06 am
by stevebez
So I think MAC address filtering should be the way to do this but it can be a bit of a struggle trying to find the device you need to block's MAC address - its someone device will have multiple - on for each connection hardware / protocol. E.g.. the wifi card will have one the ethernet card will have one etc.

Is there a more holistic means of turning internet off by schedule as you can do for wifi time schedule?

Any suggestions? maybe firewall block?

Thanks

Re: Block Internet Traffic for user - wifi & ethernet.

Posted: Mon Apr 06, 2020 10:32 am
by billion_fan
stevebez wrote: Mon Apr 06, 2020 10:06 am So I think MAC address filtering should be the way to do this but it can be a bit of a struggle trying to find the device you need to block's MAC address - its someone device will have multiple - on for each connection hardware / protocol. E.g.. the wifi card will have one the ethernet card will have one etc.

Is there a more holistic means of turning internet off by schedule as you can do for wifi time schedule?

Any suggestions? maybe firewall block?

Thanks
Yes this can be done via the firewall, see attached screen shots

1. Setup time schedule rules (for my example I want all devices to have no internet between 8pm to 9am, so we have to setup two rules)
2. Setup two firewall rules, with the source IP set to the entire subnet eg 192.168.1.1~192.168.1.253 (192.168.1.254 excluded as this the routers IP)
3. Set the 'Action' to 'Drop' and tag a time schedule rule to each firewall rule, ( 2 firewall rules for 2 time schedules rules)

Re: Block Internet Traffic for user - wifi & ethernet.

Posted: Mon Apr 06, 2020 10:55 am
by stevebez
Thats great .. just what I needed thanks!