I'm currenty using firmware 1.06a (latest firmware as of now) but I'm having problems getting the 8200N to connect to BT Infinity using VDSL. Here's a couple of screenshots :
VDSL
Now, if I connect the BT Openreach Modem to Ethernet Port 4 on the 8200N and set it up as a EWAN connection (using the same connection settings as VDSL) it works perfectly.
EWAN
I don't mind using this set-up but I know the 8200N is capable of connecting without the need of an external modem. Is there anything else I need to do when setting up the VDSL connection?
This is the username and password I'm using to connect.
Username : bthomehub@btbroadband.com
Password : BT
____________________________________________
EDIT :
Another problem I have is the wireless connection is slow.
Ethernet
Wireless
I know there would be some loss but not 25Mbit.
BT Infinity - VDSL Problems
-
- Posts: 5377
- Joined: Tue Jul 19, 2011 4:30 pm
Re: BT Infinity - VDSL Problems
Did you setup the VLAN ID? (for a one box solution)
This should be in the quick start guide that came with the unit.
This should be in the quick start guide that came with the unit.
-
- Posts: 9
- Joined: Fri Jun 22, 2012 11:45 am
Re: BT Infinity - VDSL Problems
No, I didn't. After a search I found that the VLAN Tag for BT Infinity is 101. But I need some help with the settings :
It's asking me to select a LAN port. I don't understand which one I should tick or what WAN Tag setting I should choose.
It's asking me to select a LAN port. I don't understand which one I should tick or what WAN Tag setting I should choose.
-
- Site Admin
- Posts: 92
- Joined: Mon Jul 04, 2011 2:53 pm
Re: BT Infinity - VDSL Problems
It's easy! You are nearly there. Just tick all 4 LAN and the WLAN and then select WAN TAG(NAT). Save you settings and you are done
-
- Posts: 9
- Joined: Fri Jun 22, 2012 11:45 am
Re: BT Infinity - VDSL Problems
Ok. Just tried that, I still get "No Response" from VDSL. I've gone back to EWAN for now. I have no idea what's wrong. Has anyone else been able to set BT Infinity up via the Billion 8200N?
Supposedly the modem needs DSLAM compatibility? (whatever that is)
Does the Billion 8200N support that?
Supposedly the modem needs DSLAM compatibility? (whatever that is)
Does the Billion 8200N support that?
-
- Posts: 9
- Joined: Fri Jun 22, 2012 11:45 am
Re: BT Infinity - VDSL Problems
So nobody has got the Billion 8200N to work with Infinity then?
-
- Posts: 49
- Joined: Tue May 08, 2012 2:04 pm
Re: BT Infinity - VDSL Problems
One question, what modem did Open reach install, Huawei or ECI?Gazerd wrote:So nobody has got the Billion 8200N to work with Infinity then?
I had an ECI modem installed because the street cabinet has an ECI MSAN and I'm can't get the router to sync up.
Edit: What I should have said is "Are you connected to and ECI or Huawei cabinet?" because Openreach have been fitting Huawei modems to lines connected to ECI cabinets so using the modem as guide doesn't always work.
-
- Posts: 9
- Joined: Fri Jun 22, 2012 11:45 am
Re: BT Infinity - VDSL Problems
They gave me a Huawei Modem. Is there any way I can still get this to work? (tried everything...)simon194 wrote:One question, what modem did Open reach install, Huawei or ECI?Gazerd wrote:So nobody has got the Billion 8200N to work with Infinity then?
I had an ECI modem installed because the street cabinet has an ECI MSAN and I'm can't get the router to sync up.
Edit: What I should have said is "Are you connected to and ECI or Huawei cabinet?" because Openreach have been fitting Huawei modems to lines connected to ECI cabinets so using the modem as guide doesn't always work.
-
- Posts: 49
- Joined: Tue May 08, 2012 2:04 pm
Re: BT Infinity - VDSL Problems
That's odd because the 8200N apparently works OK on Huawei equipment unless they gave you a Huawei modem instead of an ECI one which does happen.Gazerd wrote:They gave me a Huawei Modem. Is there any way I can still get this to work? (tried everything...)simon194 wrote:One question, what modem did Open reach install, Huawei or ECI?Gazerd wrote:So nobody has got the Billion 8200N to work with Infinity then?
I had an ECI modem installed because the street cabinet has an ECI MSAN and I'm can't get the router to sync up.
Edit: What I should have said is "Are you connected to and ECI or Huawei cabinet?" because Openreach have been fitting Huawei modems to lines connected to ECI cabinets so using the modem as guide doesn't always work.
Do the street cabinets look like the ECI one in this link, http://www.robertos.me.uk/html/street_cabinets_etc.html? It's the only foolproof way to determine whether it Huawei or ECI gear being used.
-
- Posts: 9
- Joined: Fri Jun 22, 2012 11:45 am
Re: BT Infinity - VDSL Problems
Yep, it looks like its a ECI 128.
Is there anything I can do to connect without using the Huawei?
Is there anything I can do to connect without using the Huawei?