IPv6 with Orange France

[billion_fan]

I just moved, and my fiber connection isn't moved for now (in few weeks...). I hope frederic09 can send you the informations asked.

The first weblink in the first post give you a lot of informations. I don't know if it can be useful to you...

Its in French mate.... any how our engineers would prefer two captures to compare (if we only have one capture, that will have to do for now)

[frederic09]

Ok i'll do it tonight, after work. You want the authentification with the current settings (pppoe) or the new one (ipoe) ?

Because with the IPOE settings i don't get any WAN IP, since the option 90 is not used.

I think the ONT is on bridge mode, its role is "just" to decrypt/encrypt the data.

It's because, on the french forum, someone has a laptop (with OpenBSD and dhclient) connected to the ONT.
He used 3 dhcp options : the "vendor id", the "user id" and the "authsend" options and he got the ipv4 and ipv6.

[billion_fan]

Ok i'll do it tonight, after work. You want the authentification with the current settings (pppoe) or the new one (ipoe) ?

Because with the IPOE settings i don't get any WAN IP, since the option 90 is not used.

I think the ONT is on bridge mode, its role is "just" to decrypt/encrypt the data.

It's because, on the french forum, someone has a laptop (with OpenBSD and dhclient) connected to the ONT.
He used 3 dhcp options : the "vendor id", the "user id" and the "authsend" options and he got the ipv4 and ipv6.

If you can capture both, I'm away for 2 weeks annual leave, but I'll get admin to forward the logs over to our engineers

[frederic09]

I've done the pppoe capture.

I never used Wireshark before so i hope i didn't messed up.

[Danansmith]

You guys are awesome.This helpes me a lot. Thanks.

[frederic09]

Huh? I got a notification but there's no new message.

So how is it doing ?

[billion_fan]

Huh? I got a notification but there's no new message.

So how is it doing ?

Still checking with our engineers

[Edtech]

No info on this option? It's a standard describe here: https://tools.ietf.org/html/rfc3118

I hope yours engineers will add this in a new firmware!

[billion_fan]

No info on this option? It's a standard describe here: https://tools.ietf.org/html/rfc3118

I hope yours engineers will add this in a new firmware!

No news yet, they need a working capture to compare first before adding the new feature.

[Edtech]

Sorry, I have the fiber again for a short time.

I send two captures to the support (ticket QCA-127-26142). I don't know if the captures are good, I hope!