Discussions for BiPAC 8800 series: 8800NL
-
billion_fan
- Posts: 5150
- Joined: Tue Jul 19, 2011 4:30 pm
Post
by billion_fan » Thu Nov 06, 2014 11:22 am
noriga wrote:I have reset the router to default and manually entered the configuration where everything seem to be working at normal except from the Email Alert feature which before used to work but now it does no longer work as the pop-up window of the account test stays in a Testing status but does not get through the end.
I can confirm that I have no issues in sending emails from my outlook client with the same account and before this worked previous to upgrade to this firmware.
Can someone please test this for me before I try and default the router once again?
Thanks
Max
Checking with our engineers now
-
noriga
- Posts: 26
- Joined: Wed Jul 30, 2014 8:51 pm
Post
by noriga » Mon Nov 17, 2014 9:23 am
Hi
I can confirm this now works again, issue was caused by emails temporarily being rejected.
Thanks for your attention on this.
Regards
Max
-
billion_fan
- Posts: 5150
- Joined: Tue Jul 19, 2011 4:30 pm
Post
by billion_fan » Mon Nov 17, 2014 10:50 am
noriga wrote:Hi
I can confirm this now works again, issue was caused by emails temporarily being rejected.
Thanks for your attention on this.
Regards
Max
Thanks for the update, that's great news
-
SimonCraddock
- Posts: 8
- Joined: Sat Nov 29, 2014 10:15 am
Post
by SimonCraddock » Sat Jan 03, 2015 11:02 pm
Any sign of a firmware with a more recent Broadcomm driver?
The current version 39g performs below par compared to a device using 39i.
-
billion_fan
- Posts: 5150
- Joined: Tue Jul 19, 2011 4:30 pm
Post
by billion_fan » Thu Jan 08, 2015 9:43 am
SimonCraddock wrote:Any sign of a firmware with a more recent Broadcomm driver?
The current version 39g performs below par compared to a device using 39i.
No news yet
-
magogman
- Posts: 28
- Joined: Wed Jan 28, 2015 9:33 am
Post
by magogman » Mon Jan 29, 2018 6:19 pm
I have f/ware 2.32d.dh14 on my 8800NL and an ADSL2+ connection. Is 2.32e.d14.afw, a new f/ware version, and suitable for me? I only became aware from reading another tread
but have not seen of what the new version does.
-
billion_fan
- Posts: 5150
- Joined: Tue Jul 19, 2011 4:30 pm
Post
by billion_fan » Tue Jan 30, 2018 9:09 am
magogman wrote: ↑Mon Jan 29, 2018 6:19 pm
I have f/ware 2.32d.dh14 on my 8800NL and an ADSL2+ connection. Is 2.32e.d14.afw, a new f/ware version, and suitable for me? I only became aware from reading another tread
but have not seen of what the new version does.
d14, resolves issues with port forwarding rules dropping/not working after a while
-
magogman
- Posts: 28
- Joined: Wed Jan 28, 2015 9:33 am
Post
by magogman » Tue Jan 30, 2018 4:08 pm
Thank you for that info,. It's something to keep in mind. is the f/ware actually new?
-
billion_fan
- Posts: 5150
- Joined: Tue Jul 19, 2011 4:30 pm
Post
by billion_fan » Tue Jan 30, 2018 4:11 pm
magogman wrote: ↑Tue Jan 30, 2018 4:08 pm
Thank you for that info,. It's something to keep in mind. is the f/ware actually new?
Yes, its the latest firmware for the Bipac 8800NL
-
hushcoden
- Posts: 6
- Joined: Fri Jan 26, 2018 2:12 pm
Post
by hushcoden » Wed Jan 31, 2018 9:53 pm
Hi, can we know the differences between the latest official firmware v2.32e (15 June 2015) and the beta one which I found in this forum, that is ETEC8800NL_2.32e.d14.afw ?
Thanks.