FW 2.52.d15 8800AXL R2 US output power

Discussions for BiPAC 8800 series: 8800NL, 8800NLR2, 8800AXL, 8800AXLR2
Post Reply
youngsyp
Posts: 31
Joined: Mon Jan 29, 2018 11:27 am

FW 2.52.d15 8800AXL R2 US output power

Post by youngsyp »

Hi,

Has anyone else noticed the output power from their 8800AXL R2, on the upstream, is reporting as a negative number with the latest FW version?

Please see attachment.

Cheers,

Paul
You do not have the required permissions to view the files attached to this post.
billion_fan
Posts: 5374
Joined: Tue Jul 19, 2011 4:30 pm

Re: FW 2.52.d15 8800AXL R2 US output power

Post by billion_fan »

youngsyp wrote: Wed Aug 28, 2019 10:55 am Hi,

Has anyone else noticed the output power from their 8800AXL R2, on the upstream, is reporting as a negative number with the latest FW version?

Please see attachment.

Cheers,

Paul
Just tested my test unit, output power looks fine (see attached screen shot)

(I'll also double check with our engineers to confirm, as the DSL code is the same as previous versions)
You do not have the required permissions to view the files attached to this post.
youngsyp
Posts: 31
Joined: Mon Jan 29, 2018 11:27 am

Re: FW 2.52.d15 8800AXL R2 US output power

Post by youngsyp »

Thanks for that. Would the fact that you're not replicating my set up (I.e. xDSL Mode), affect what you're seeing, in comparison?

Paul
billion_fan
Posts: 5374
Joined: Tue Jul 19, 2011 4:30 pm

Re: FW 2.52.d15 8800AXL R2 US output power

Post by billion_fan »

youngsyp wrote: Wed Aug 28, 2019 11:28 am Thanks for that. Would the fact that you're not replicating my set up (I.e. xDSL Mode), affect what you're seeing, in comparison?

Paul
Not that I'm aware of, but I will get my engineers to confirm

Our engineers have stated the output power looks fine from there tests, they have stated to try a factory reset (but I am not sure that will help)
kmr1962
Posts: 26
Joined: Mon Aug 15, 2011 5:20 pm

Re: FW 2.52.d15 8800AXL R2 US output power

Post by kmr1962 »

youngsyp wrote: Wed Aug 28, 2019 11:28 am Thanks for that. Would the fact that you're not replicating my set up (I.e. xDSL Mode), affect what you're seeing, in comparison?

Paul
Just for info, Mine shows OK on VDSL2 on firmware 2.52.d15
Capture-2.JPG

Edit :
One thing just occurred to me
I have a recollection that ECI FTTC cabinets have a tendency to report "Strange" power settings
The cabinet I'm connected to is a Huawei cabinet.

Kevin
You do not have the required permissions to view the files attached to this post.
Grimers
Posts: 124
Joined: Mon Mar 06, 2017 11:59 am
Location: Newton Poppleford, Devon, UK
Contact:

Re: FW 2.52.d15 8800AXL R2 US output power

Post by Grimers »

Yes, Kevin is right. I wouldn't be too concerned about that, it is possible for power output to be a negative figure on ECI cabinets.
William Grimsley.
Post Reply